Maxisil Mould Remover.
-
Removes mould, mildrew and algae. - Available in 250ml spray bottles.
- For removal of organic-biological contamination in the sanitary sector and for interior use.
Instructions for use:
- Do not touch any mould.
- Spray mould remover spray from a distance of approximately 5-10cm, spray again if necessary.
- The immediate visible change in colour indicates the destructions. Ensure good ventilation at the workplace.
- Clean treated tile joints with water after 10 minutes.
Please Note: The bleach may cause changes in colours of textiles, carpets and woods.
Caution: Do not use mould remover spray together with other products as dangerous gases (e.g. chlorine) may be released.
Keep out of reach of Children: Rinse spray head with water after usage and turn safety cap clockwise to lock the bottle. Store safe from frost and in a cool dark place.
Contains bleaching agent with approximately 2% active chlorine, nonionic detergents, auxiliary agents.
View our helpful guide to causes, countermeasures and prevention of mould fungus on sealants.
AUSTRALIA.
Contact Details:
Head Office
Roberts Designs
204 Boneo Rd,
Rosebud VIC 3939
Ph:03 5986 6366
Fax:03 5986 6680
Email: \n
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
New Zealand: http:// tile.co.nz
Heritage Tiles Ellerslie
218a Marua Road
Ellerslie
Hours
Mon - Fri: 7.30am - 5.00pm
Sat: 8.00am - 4.00pm
Sun: 10.00am - 3.00pm
Ph:09 579 4200
Fax:09 579 1022
