Anti-Slip Treatments
We are able to apply Anti-Slip Treatments to ceramic, porcelain and natural stone surfaces.
Different situations require different methods to achieve the desired result. We are able to perform several procedures, these are:
- Titanium Micro-pore Technology
- Non-Slip Surface Coatings
- Acid etching
- Sandblasting
To achieve an Anti-Slip finish on this polished floor surface, several procedures were undertaken.
First the stone was sandblasted to 'key up' the surface. This provides the anti-slip finish. This procedure considerably lightens the stone, as can be seen in the bottom right corner of the photograph.
The area was then enhanced to bring the colour up to match as closely as possible to the surrounding areas. This sealer is shown surrounding the light sandblasted patch in the left hand side of the photo.
This is a highly beneficial procedure for external paths and pool/patio areas. Shower bases also benefit from this treatment, as these are a fairly common hazard area around the home.
Lustre Ltd
F. 09-526 5909
Dino Gagas - M. 021-930 066 - \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Scott Schrader - M. 021-987 970 - \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it
