Pilkington's Flex Joint Grout-for areas where movement or vibration is a key consideration-Data Sheet.

Flex Joint Grout has been specially formulated for areas where movement or vibration is a key consideration. With excellent joint filling capacity, Flex Joint Grout allows for joints up to 20mm to be grouted in one application. Polymer has been added to the formulation to increase flexibility and to provide a virtually impermeable set. It is suited for use with most common tile applications including ceramic, porcelain, conglomerate and natural stone wall and floor tiles.

Features

    * For use with1-20mm joint widths
    * Suitable for internal & external applications
    * Suitable in kitchens, bathrooms, swimming pools & power showers
    * Water repellent
    * Polymer modified
    * Anti-fungal
    * Mould resistant

Properties
Constitution     Powder
Appearance     Powder, colour options listed below
Mix Ratio     Fine Joint Grout should be added slowly to clean water in a suitable container in the approximate proportion of 3.5 parts powder to 1 part water. Mix until a smooth consistency is achieved
Application Temperature     5°C to 20°C
Open Time     Do not mix more than can be used in a 45-60 minute period, do not rewet or add too much water
Pot Life

60 minutes, depending on temperature

6 months, when stored in cool, dry conditions and protected from excessive drafts
Set Time     24 hours
Coverage     Approx 0.3 kg/m2 (150x150x6mm tiles, 3 mm joints)
Colours     White, Limestone, Anthracite, Grey
Pack Sizes     10kg
Notes     Times quoted are quoted at 20°C and are temperature/humidity dependent. Please note that certain tiles may suffer discolouration or scratching when using grouts, and it is recommended a test application be carried out prior to application
Preparation     Ensure that the adhesive is completely set and that tiles are firmly fixed. Ensure that joints are free from excess adhesive, dust, grease or any other contaminates
Application     Flex Joint Grout should be applied to the surface using a rubber backed trowel or squeegee. Work the mixed material thoroughly into the joints, a small area at a time. Ensure that joints are completely filled without voids before continuing. Excess grout should be removed as grouting proceeds
Cleaning     Use a soft dry cloth to remove surface excess when grout has begun to dry (10-15 minutes)

Click here to download a Material Safety Data Sheet for WHITE
Click here to download a Material Safety Data Sheet for GREY
Click here to download a Material Safety Data Sheet for LIMESTONE
Click here to download a Material Safety Data Sheet for ANTHRACITE

Contact Us.

http://www.pilkingtons.com

Pilkington's Group Customer Services

Tel: +44 (0)161 727 1111
Fax: +44 (0)161 727 1122
eMail : \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Technical Advice

Tel: +44 (0)161 727 1159
Fax: +44 (0)161 727 1122
eMail : \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Quiligotti Access, Acoustic and Hardwood Flooring

Tel: +44 (0)161 727 1070
Fax: +44 (0)161 727 1080
eMail : \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Supplier and Export Enquiries

Tel: +44 (0)161 727 1111
Fax: +44 (0)161 727 1122
eMail : \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it