ASA Multiprime is a synthetic latex based liquid- Technical Data Sheet
DESCRIPTION
Multiprime is a synthetic latex based liquid which can be used for priming a variety
of substrates prior to the use of ASA adhesives and ASA water based waterproofi ng
membranes. Multiprime will eliminate dust and reduce porosity of plasterboard, fi brous
cement sheeting, cement render, porous concrete and timber fl oors.
FEATURES & BENEFITS
• Reduces porosity
• Makes adhesive application easy
• Stops premature drying of adhesives
• Eliminates dust
• Expands open time
RECOMMENDED FOR
• Porous concrete
• Cement render
• Blockwork
• Brickwork
• Hebel blocks
• Sand/cement screeds
• Fibrous cement sheeting
• Plasterboard
• Timber
• Particleboard
SURFACE PREPARATION
Surfaces must be fi rm, clean, dry, sound and smooth. All grease, oil, wax, curing compound, dust, plaster
droppings and paint must be removed prior to the application of Multiprime. Building boards, timber and
particleboard fl ooring must be fi xed in accordance to the manufacturer’s directions. Timber and particleboard
fl ooring must be sanded prior to application of Multiprime. Cement render must be allowed to cure for at least 7
days and concrete for at least 28 days.
APPLICATION
Apply Multiprime onto the correctly prepared surface using a brush, roller or sponge. Allow to dry for at least 30
minutes prior to the application of adhesive or waterproofi ng membrane.
CLEAN UP
Multiprime can be cleaned up using warm water and detergent prior to the product drying.
PACKAGING
20 litre, 5 litre and 1 litre plastic jerry cans.
COVERAGE
Approximately 8m² per litre depending on porosity of substrate.
SAFETY PRECAUTIONS
This product is non-toxic and has no known harmful effects. It is advisable to wear gloves and use good
occupational health and safety practices to avoid personal contact. For more detailed information refer to
product MSDS.
SHELF LIFE
Unopened containers can be stored for up to 12 months in a cool, dry and weatherproof environment
LIMITATIONS
Do not use on non-porous surfaces such as existing tiles, waterproofi ng membranes or steel trowel fi nished
fl oors
Only suitable on porous surfaces
Technical Data Sheet
http://asanzltd.com/pdffiles/Additives/MULTIPRIME.pdfFREEPHONE: 0508 222 777
FREEFAX: 0508 222500
148 Pavilion Drive
Air Park II
Auckland Airport
Auckland 2022
(off Montgomerie Road)
Penrose, Auckland
telephone: 09 257 3580
facsimile: 09 257 3589
email: \n \n \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it
