LATICRETE 290
Premium Floor n’ Wall Thin-Set Mortar
Data Sheet 657aus.0
Data sheets are subject to change without notice LDS657aus.0 051205
1. PRODUCT NAME
LATICRETE® 290 Premium Floor N’ Wall Thin-Set Mortar
2. MANUFACTURER
LATICRETE Pty Ltd
464 Geelong Road,
Footscray West. VIC. 3012
Telephone: 03 99336111
Toll Free: 1800331012
FAX: 03 99336199
Email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Internet: www.laticrete.com
3. PRODUCT DESCRIPTION
LATICRETE 290 Premium Floor N’ Wall Thin Set Mortar is a
high performance bagged cementitious powder to be mixed
with either water or latex admixture to install ceramic tile and
natural stone using the thin-set method of installation.
Uses
Designed for interior or exterior installation of ceramic tile
and natural stone for walls and floors.
Advantages
- High Tack - Will hang tile without slippage
- Dual purpose, for walls and floors
- Water Cleanable
- Easy to Use - Plastic, workable and long open time
- High Bond Strength - 200% stronger than mastic type
adhesives
- Safe - non-flammable and non-toxic during storage,
application and after hardening
Suitable Substrates
- Concrete ,Concrete Masonry
- Cement Mortar Beds ,Cement Plaster
- Ceramic Tile and
Stones**
- Brick Masonry
- Exterior Grade Plywood
(Interior Only)*
- Cement Terrazzo**
- Gypsum Wall Board
(Interior Only)
- Cement Backer Board***
*When mixed with LATICRETE 333 Super Flexible Mortar Additive.
**When mixed with LATICRETE 3701Mortar Admixture.
***Consult cement backer board manufacturer for specific installation
recommendations and to verify acceptability for exterior use.
Packaging - 20 kg bags, Color: White, Off White and Grey.
