0800TILES.COM

LATICRETE ULTRA X8
Fibre & Polymer Fortified Flexible Adhesive
Data Sheet X8aus.0
This data sheet is subject to change without notice LDSx8aus.0 061205
1. PRODUCT NAME
LATICRETE® Ultra X8 Fibre & Polymer Fortified Flexible
Multipurpose Adhesive
2. MANUFACTURER
LATICRETE Pty Ltd.
464 Geelong Road,
Footscray West. VIC. 3012.
Telephone: 03 99336111
Toll Free: 1800 331012
Fax: 03 99336199
Toll Free Fax: 1800 808549
Internet: www.laticrete.com.au
3. PRODUCT DESCRIPTION
LATICRETE Ultra X8 Adhesive is a bagged cementitious
powder to be mixed with either water or latex admixtures
for installing porcelain, vitrified, ceramic, stone tile to
floors and walls in both internal and external areas. The
unique fibre reinforcing adds workability, flexibility and
reduces shrinkage of the adhesive. Is up to 40% higher
performing than normal cement based adhesives.
Uses
Designed for interior and exterior floor and wall
installations of ceramic tile and natural stone over
concrete, cement sheet, Gyprock, suitable waterproof
membranes, screeds and rendered substrates. Tile over
tile when mixed with a LATICRETE latex.
Advantages
- Creamy ,Long Open Time
- Non-Sag ,Interior and Exterior
- Thermal Shock Resistant
- For floor and wall applications
- Very good impact resistance
- Exceeds all bond strength requirements of ANSI
118.4
Suitable Substrates
- Concrete ,Brickwork
-Cement Mortar Beds , Cement Render
- Concrete Masonry , Cement Sheet
- Exterior Grade Plywood (Interior Use Only)
- Gypsum Wall Board (Interior Use Only)
- Suitable waterproof membranes
*Consult cement backer board manufacturer for specific
installation recommendations and to verify acceptability
for exterior use.
Packaging
20 kgs
Colours: Off White & White.
Coverage
Approximately 7-8m2 per 20kg bag with 6mm x 6mm
notched trowel.