Biscem Power Showerproof-Readymixed white non-slip adhesive for ceramic wall tiles-Technical Data Sheet.
Biscem Power Showerproof is specially formulated to resist the conditions that exist in modern shower areas where high pressure pumped jets of water are a feature of the installation. It is a versatile, non-slip, water resistant acrylic adhesive and is suitable for a wide range of applications including wet and dry internal areas in most commercial and domestic situations. It is not suitable for external tiling or where tiles are totally immersed i.e. swimming pools. For these applications use Biscem cement based adhesive.
Biscem Power Showerproof tile adhesive is suitable for use in internal wall applications, such as kitchens, worktops, bathrooms and is ideal for use in power showers.
Power Showerproof only requires stirring in the tub and is then ready to use
Quality and Standards
Biscem Power Showerproof conforms to:
* BS 5980 Type 2 Class AA, adhesives for use with Ceramic Tiles and Mosaics.
* BS5385 Part 1 : 1976 - Wall Tiling - Internal Ceramic Wall Tiling and Mosaics in normal conditions.
* BS5385 Part 2 : 1978 - Wall Tiling - Internal Ceramic Wall Tiling and Mosaics.
Biscem Power Showerproof tile adhesive conforms to the requirements of BS 5980 Type 2 Class AA
Features
* White in colour
* Ready-to-use: is user friendly being completely factory batched.
* Easy to Spread: is designed to be highly workable.
* Versatile: can be applied onto most sound and rigid sub-strates.
* Non-slip: good non-slip properties from a high degree of initial grab to absorbent and some non absorbent backgrounds.
Bed thickness 3mm
Open Time 20 minutes
Setting Time 24 hours
Coverage 1 litre / metre² depending on surface type and trowel size
Shelf life 12 months when stored in cool place unopened
http://www.biscem.co.uk
Biscem Products
Bostik Ltd
Common Road
Stafford
Staffordshire
ST16 3EH
\n This e-mail address is being protected from spambots. You need JavaScript enabled to view it
