Biscem Timber-Fix-Readymixed flexible wood floor tile adhesive & grout-Technical Data Sheet.
Biscem Timber-Fix is a specially prepared tile adhesive suitable for adhering ceramic tiles to tongue & groove, wood and composite boards. The use of plywood overlayment can be removed by correctly screwing down the boards and gluing where possible.
Timber-Fix is suitable for use in internal dry floor applications, such as kitchens and bathrooms, but should not be used in wet areas or areas subject to frequent wetting. Where Biscem Timber-Fix is used to take up slight vibration or movement, it must also be used as the grouting material.
Quality and standards
Biscem Timber-Fix conforms to the requirements of BS 5980 Type 2 Class B.
Features.
* Ready-to-use
* Easy to Spread: is designed to be highly workable.
* Flexible: the flexibility within the adhesive means that Timber-Fix should be used for grouting the tiles applied.
* A flexible grout
Bed thickness 3mm
Open Time 20 minutes
Setting Time 24 hours
Coverage
1 litre / m² depending on surface type and trowel size
Shelf life 12 months when stored in cool place unopened
Colour Dark Grey
Useful information
A half moon notched trowel should always be used to achieve full coverage.
Biscem Timber-Fix sets by drying and hence use of low absorbency tiles and substrates will significantly increase the setting time.
Temperature and ambient humidity can also affect the setting time
Complementary Products
A 10 mm half moon notched trowel is available to enable correct application.
Download the Biscem Timberfix Grout Colour Chart
http://www.biscem.co.ukBiscem Products
Bostik Ltd
Common Road
Stafford
Staffordshire
ST16 3EH
\n This e-mail address is being protected from spambots. You need JavaScript enabled to view it









