Biscem Vitri-Flex-Single part flexible, fast setting tile adhesive-Technical Data Sheet.
Biscem Vitri-Flex is a rapid setting cementitious tile adhesive suitable for adhering porcelain wall and floor tiles, vitrified tiles, natural and artificial stone and quarries, to a variety of dry substrates such as dense concrete, cement sand screed, masonry, sand cement plaster and plasterboard plywood overlay, tile backer boards, existing tiles bases, vinyl tiles and sheets and mastic asphalt.
Vitri-Flex is Ideal for fast track applications as it is sufficiently hard that tiles can be grouted after only 2 hours.
With an increased polymer content the use of Vitri-Flex tile adhesive removes the need to add Flexibond when using low porosity tiles. Biscem Vitri-Flex requires, for most applications, only the addition of clean water.
Quality and standards
Biscem Vitri-Flex tile adhesive is manufactured under a BSI approved quality system to EN ISO 9002 and conforms to the requirements of BS 5980 Type 1 Class AA.
Features
* Rapid Setting: can be grouted after only 2 hours.
* Easy to Mix: requiring only mixing water and a suitable paddle mixer and paddle.
* Versatile: can be applied onto most dry, sound and rigid internal sub-strates.
* Available in white for use with translucent marble and natural stone tiles.
Bed thickness 3-6mm, up to 12mm in localised areas
Open Time 20-30 minutes
Setting Time 2 hours
Coverage
20 kg bag correctly mixed will cover 6-7 square metres when applied at a thickness of 3mm.
Shelf life 12 months when stored in cool place unopened
Colour Grey & White
Packaging 20kg & 10kg
Download the Biscem Vitri-Flex Product Datasheet
http://www.biscem.co.uk
Biscem Products
Bostik Ltd
Common Road
Stafford
Staffordshire
ST16 3EH
\n
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
