Biscem Vitri-Rapid-Polymer modified tile adhesive-Technical Data Sheet.
A fast setting cementitious tile adhesive suitable for external and internal applications of porcelain and fully vitrified wall and floor tiles, natural and artificial stone and quarries, to a variety of substrates such as dense concrete, cement sand screed, masonry, and sand cement render.
Biscem Vitri-Rapid tile adhesive is ideal for fast track applications as it is sufficiently hard so that tiles fixed can be grouted after only 2 hours.
With an increased polymer content the use of Biscem Vitri-Rapid tile adhesive removes the need for an additive when using low porosity tiles.
Quality and standards
Biscem Vitri-Rapid tile adhesive is manufactured under a BSI approved quality system to EN ISO 9002 conforms to the requirements of BS 5980 Type 1 Class AA.
Features
* Rapid Setting: can be grouted after only 2 hours.
* Easy to Mix: requiring only mixing water and a suitable paddle mixer and paddle.
* Does not require the use of a flexible admixture for low porosity applications.
* Available in white for use with translucent marble and natural stone tiles.
Bed thickness 3-6mm, up to 12mm in localised areas
Open Time 20-30 minutes
Setting Time 2 hours
Coverage 20kg bag correctly mixed will cover 6-7 square metres when applied at a thickness of 3mm.
Shelf life 12 months when stored in a cool place unopened
Colours Grey & White
Packaging 20kg & 10kg
http://www.biscem.co.uk
Biscem Products
Bostik Ltd
Common Road
Stafford
Staffordshire
ST16 3EH
\n \n This e-mail address is being protected from spambots. You need JavaScript enabled to view it
